Chemicals

Bracton Beerline cleaners

Bracton Beerline cleaners are all "zero degrees Brewery approved". Ideal for Ice Banks or Glycol Systems. Removes beerstone and kills bacteria in beerlines.

NOTE: NEW MIXING INSTRUCTIONS ALL TWO PART BEERLINE CLEANERS SHOULD BE MIXED AT EVEN RATIOS, 60ml of DP1 and 60ml of DP2 per 5 Litres of water.

"All Bracton Beerline Cleaner's are approved by Tooheys and CUB."

lionnathan          cub          tooheys

 

dp1dp2

 

DP1 & DP2 Beerline cleaner - Bracton's 2 part beerline disinfecting process.
Available in 12.5 Kit(10 x 1Lt DP1 + 10 x 250Ml DP2),15Lt Kit(2 x 5Lt DP1 + 1 x 5Lt DP2), 15Lt Drum and 24Lt Drum.

twin

Twin Beerline Cleaner - Bracton's single pack beerline cleaner can be mixed at night and used in the morning. Easier mixing. (Also used for glass soaking).
Available in 15Lt.

low1low2

Bracton Low Ph Beerline Cleaner (2 part cleaner)- The pH concentration at 11(alkaline) has the effect of being less aggressive on skin and tissue if accidental contact should occur.Precautions still need to be taken with concentrated form, however once diluted to the working solution, the low pH is rated in the same catagory as non-hazardous chemicals, alleviating dangers involved in accidental contact or consumption. This is the ONLY Low pH beerline cleaner approved by all major breweries: Lion Nathan, CUB & Tooheys.

Click here for a brochure.

Bracton Low pH Beerline Cleaner is fully compatible with the current dosing system, and appropriate labels are available from Bracton Industries.

Available in pack sizes of 12.5lt Handipack, 12.5lt set, 15lt Part 1 and Part 2, and 24lt Part 1 and Part 2

Test papers

Bracton Test Papers - A strip of test papers for convenient and simple method of testing when Beerline Cleaner is present. Turns blue in alkaline solutions. A must for safety. Pack of 10 x 20 strips.

USAGE: After performing normal brewery cleaning process and flushing, test for alkalinity by taking a pink test paper and wetting it with beerline flush water from tap. If it changes to a bluish colour, then continue flushing with water, retest till paper stays pink. Pink colour on testing means it is safe to remove signs.

Back to chemicals